Sony STR-DN1070 User Manual page 49

Note
Update the iPhone/iPad/iPod or iTunes to the latest version before using with the receiver.
Refer to the operating instructions of your device for details on operating the iPhone/iPad/iPod,
iTunes or AirPlay.
Hint
If the playback does not start, perform the process again from step 1.
Very loud sound may output from the receiver if you set the volume loud on an iPhone/iPad/iPod or
iTunes.
It may not be possible to link the volume level of an iPhone/iPad/iPod or iTunes with the volume level
of this receiver.
[54] Enjoying Video and Sound
Enjoying audio content using the BLUETOOTH
function (Pairing operation)
Pairing is an operation where BLUETOOTH devices are registered to each other before
connection. Once a pairing operation is performed, it does not need to be performed again. Be
sure to set the [Bluetooth Mode] to [Receiver] before pairing a device with this receiver.
Place the BLUETOOTH device within 1 meter (3.3 feet) of the receiver.
1
Press and hold CONNECTION
2
the BLUETOOTH function.
[PAIRING] flashes on the display panel. Perform step 3 within five minutes, otherwise
pairing will be canceled. If pairing is canceled, repeat this step.
Perform pairing on the BLUETOOTH device to detect this receiver.
3
For details, refer to the operating instructions of your BLUETOOTH device.
A list of detected devices may appear on the BLUETOOTH device display depending on
the type of BLUETOOTH device. This receiver is displayed as [STR-DN1070 XXXXXX]
(*).
Select [STR-DN1070 XXXXXX] (*) on the BLUETOOTH device display.
4
If [STR-DN1070 XXXXXX] (*) is not displayed, repeat this process from step 1.
When the BLUETOOTH connection is established, the device name appears and [BT]
lights up on the display panel.
Start playback on the BLUETOOTH device.
5
Adjust the volume.
6
Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust
the volume level of the receiver.
* XXXXXX is the identification number for each unit.
Canceling pairing operation
Pairing opearation will be canceled when you switch the input.
Playing content from an iPhone/iPad/iPod
PAIRING BLUETOOTH on the receiver to select