Sony STR-DN1070 User Manual page 122

[SA-CD/CD], [VIDEO 1], [VIDEO 2] or [Screen mirroring], the receiver will turn off
when the TV is turned off.
On: The receiver will turn off when the TV is turned off, regardless of the input of the
receiver.
Off: The receiver does not turn off when the TV is turned off, regardless of the input of
the receiver.
Note
The connected device may not turn off depending on the status of the device.
System Power Off function may work with devices other than those manufactured by Sony, but
operation is not guaranteed.
[179] Adjusting Settings HDMI Settings
Enjoying content of a connected device without
turning on the receiver (Standby Through)
This function allows you to enjoy the sound and image of a connected device without turning on
the receiver.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Standby Through].
2
Select the setting you want.
3
Auto: The receiver outputs HDMI signals to the TV from the HDMI OUT jack when the
TV is turned on while the receiver is in the standby mode.
Sony recommends this setting if you are using a "BRAVIA" Sync-compatible TV
manufactured by Sony. This setting saves power in the standby mode compared to
the [On] setting.
On: The receiver continuously outputs HDMI signals from the HDMI OUT jack when in
standby mode. Sony recommends this setting if you are using a TV that is not
manufactured by Sony.
Off: The receiver does not output HDMI signals when in standby mode. This setting
saves power in the standby mode compared to the [On] setting.
Note
When the receiver is in standby mode, the power indicator on the front panel lights up in amber if
[Standby Through] is set to [On] or [Auto].
When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV
than when [On] is selected.
This function does not work for the HDMI OUT B/HDMI ZONE jack.
[Auto] may work on other devices than those manufactured by Sony. However, operation is not
guaranteed.
[180] Adjusting Settings HDMI Settings
Setting the HDMI audio signal output of connected
devices (Audio Out)
You can set the HDMI audio signal output of playback devices connected to the receiver via an