About Indicators On The Display - Sony STR-K890 Service Manual

QQ
3 7 63 1515 0
TE
L 13942296513
www
.
http://www.xiaoyu163.com
About the indicators on the display
1 2 3 4
; ;
SP A D EX
SW LFE
SP B
L C R
SL S SR
SB
qg
Name Function
A SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used.
However, these indicators do
not light up if the speaker output
is turned off or if a headphone is
connected.
D ; D (EX)
Lights up when the receiver is
decoding Dolby Digital signals.
"; D EX" lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG".
E ; PL II (x)
Lights up when the Pro Logic II
Movie/Music/Game decoder is
activated.
"; PL IIx" lights up when the
Pro Logic IIx Movie/Music/
Game decoder is activated.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
F ; PL
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
G OPT
Lights up when VIDEO 2 input
is selected. However,
"UNLOCK" appears on the
display if no digital signal is
input through the OPTICAL
jack.
"OPT" also lights up when SAT
input is selected if
– INPUT MODE is set to
"AUTO IN" and the source
signal is a digital signal being
input through the OPTICAL
x ao
jack.
y
– INPUT MODE is set to "OPT
IN".
i
http://www.xiaoyu163.com
8
5 6 7 8
;
PL IIx PL OPT DTS -ES 9 6 / 2 4
COAX NEO:6
qf qd
Name
H DTS (-ES)/
(96/24)
I MEMORY
J Tuner
indicators
Q Q
3 6 7 1 3
K Preset
station
indicators
L D.RANGE
M NEO:6
N COAX
O Playback
channel
indicators
L
R
C
SL
SR
S
SB
u163
.
2 9 9 4 2 8
9 q;
MEMORY RDS ST
D.RANGE MONO
qs qa
Function
Lights up when the receiver is
decoding DTS signals.
"DTS-ES" lights up when the
receiver is decoding DTS-ES
signals.
"DTS 96/24" lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG".
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
Lights up when using the
receiver to tune in radio stations,
1 5 0 5 8 2 9 9 4
etc.
Lights up when using the
receiver to tune in preset radio
stations. For details on
presetting radio stations.
Lights up when dynamic range
compression is activated.
Lights up when DTS Neo:6
Cinema/Music decoder is
activated.
Lights up when INPUT MODE
is set to "AUTO IN" and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to "COAX
IN".
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back (the surround
back components obtained by
m
6.1 channel decoding)
Example:
Recording format (Front/
co
Surround): 3/2.1
Sound Field: A.F.D. AUTO
SW
L C R
SL SR
STR-K890
9 9
2 8 9 9
5