Sony STR-DN1070 User Manual page 87

Select [Setup] - [Zone Settings] from the home menu.
1
Select [Zone2 Line Out].
2
Select the setting you want.
3
Variable:
Recommended when using another amplifier that does not have volume control for
Zone 2.
The volume for the ZONE 2 OUT jacks can be changed.
Fixed:
Recommended when using another amplifier with variable volume control for Zone 2.
The volume for the ZONE 2 OUT jacks is fixed.
Note
When [Variable] is set, the volume is turned down by default. Turn up the volume while listening to
the sound after completing setup. The volume for the SPEAKERS ZONE 2 terminals is changed
together with the volume for the ZONE 2 OUT jacks.
[111] Using the Multi-Zone Features
using another amplifier
Enjoying sound using another amplifier in Zone 2
You can enjoy sound from the receiver in Zone 2 by the following procedure.
1 Turn on the amplifier in Zone 2.
Select [Zone Controls] - [Zone2 Power] from the home menu.
2
Select [On].
3
Zone 2 is activated.
Select [Zone Controls] - [Zone2 Input] from the home menu.
4
Select the source signals you want to output.
5
Adjust to a suitable volume.
6
Adjust the volume using the amplifier in Zone 2. If you set [Zone2 Line Out] to [Variable],
you can also adjust the volume in Zone 2 using [Zone Controls] - [Zone2 Volume] from the
home menu.
Hint
You can also activate Zone 2 using ZONE SELECT and ZONE POWER on the receiver.
You can also select source signals you want to output using INPUT SELECTOR on the receiver
while [2. xxxx (input name)] is shown on the display panel.
You can also adjust volume using MASTER VOLUME on the receiver while [2. xxxx (input name)] is
shown on the display panel.
Enjoying sound from speakers located in other rooms