Brightselect; Selecting Lamps Using Brightselect - Christie BOXER 30 User Manual

Hide thumbs Also See for BOXER 30:

Table of Contents

BrightSelect

This feature allows users to select specific lamps to power on and off during projector operation.

Use the BrightSelect options to manage which lamp is on and off to control brightness levels.

Operating fewer than six lamps may extend the life of a set of six lamps by rotating the use of lamps.

To maintain original brightness if a lamp fails when operating fewer than six lamps, BrightSelect

automatically strikes one of the inactive lamps.

•

Limited power mode—Only one lamp can be selected.

•

Full power mode—Between one to six lamps can be selected.

Use BrightSelect to determine which lamps are on and off during projector operation.

1. Select Menu > Configuration > Lamp > BrightSelect.

2. Select the lamps to activate.

In limited power mode only one lamp can be activated.

3. To set the system to automatically turn on a deselected lamp if one of the selected ones fails

to maintain the required level of brightness, select Enable automatic lamp redundancy.

4. Select Apply.

Boxer 30 (Bb.2) User Manual

020-102016-02 Rev. 1 (02-2016)

™

Configuring system settings

™

Table of Contents