Projector Led Shutter Indicators; Turning The Projector Off - Christie BOXER 30 User Manual

LED State
Flashing
Off

Projector LED shutter indicators

Identify the shutter LED state colors and meaning.
LED
Solid magenta
Off

Turning the projector off

When powering off in preparation for inspection or maintenance, always disconnect from AC.
1. To turn the lamps off, press and hold the Power button until you hear a beep.
When powering off the projector, allow the projector to complete its cool down cycle. Do not
immediately unplug the projector if this can be avoided.
2. To turn off power to the projector, disconnect from AC power.
Boxer 30 (Bb.2) User Manual
020-102016-02 Rev. 1 (02-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Error
AC off
State
Shutter closed
Shutter open
Description
An error with the projector exists during startup,
cool down, or when the lamps are off. Projector will
proceed to shut down.
The AC power is off.
Description
The shutter is closed.
In standby, the shutter is always automatically closed and
the magenta light is muted.
The shutter is open.
Introduction
16