Light Intensity Hazard Distance - Christie BOXER 30 User Manual

Light intensity hazard distance

This projector has been classified as Risk Group 3 as per the IEC62471 standard due to possible
hazardous optical and thermal radiation being emitted.
Warning! Failure to comply with the following could result in serious injury.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam is permitted.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam
within the hazard distance or install the product at the height (greater than or equal to 3.0 m
from the floor to the beam) that prevents exposure of spectators' eyes within the hazard
distance.
• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.
The following diagram and table shows the zones for optical and thermal radiation hazard distances:
B
A
• Zone A—The light intensity may cause eye damage after a momentary or brief exposure
(before a person can avert his or her eye away from the light source). The light may cause
skin burns to occur.
• Zone B—The light intensity does not pose a hazard due to the eye's aversion response to bright
light. However, staring directly into the light may still be a hazard.
Projection lens
0.72:1 HB fixed lens
0.9:1 fixed lens
1.13-1.31:1 HB zoom lens
1.31-1.63:1 HB zoom lens
1.63-2.17:1 HB zoom lens
1.99-2.71:1 HB zoom lens
2.71-3.89:1 HB zoom lens
3.89-5.43:1 HB zoom lens
4.96-7.69:1 HB zoom lens
Boxer 30 (Bb.2) User Manual
020-102016-02 Rev. 1 (02-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Part number
144-110103-XX
144-111014-XX
144-103105-XX
144-104106-XX
144-105107-XX
144-106108-XX
144-107109-XX
144-108100-XX
144-109101-XX
B
A
Zone A (m)
0 to 0.6
0 to 0.7
0 to 1.1
0 to 1.3
0 to 1.7
0 to 2.2
0 to 3.1
0 to 4.2
0 to 6.0
Introduction
Zone B (m)
0.6+
0.7+
1.1+
1.3+
1.7+
2.2+
3.1+
4.2+
6.0+
7