Interrupting The Copy Job - Fuji Xerox APEOSPORT-II C7500 User Manual

3 Copy
3
Set the number of copy sets with the numeric keypad. The new quantity must include
the number of copies that have already been printed. You cannot enter a number less
than the number of copies that have already been printed.
4
Press the <Start> button.

Interrupting the Copy Job

You can temporarily stop the copy job to have the machine process another job.
1
Press the <Interrupt> button.
Note
3
2
Load a document and set features if necessary.
3
Set the number of copy sets with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
Note
6
Press the <Start> button. The suspended copy job is resumed.
56
• The interrupt indicator lights
up to indicate that the
machine is in the interrupt
mode.
• The interrupt indicator goes out to indicate that the interrupt mode is exited.
• If you used the document glass to copy the document, remove the document from the
document glass.
1 2 3
4 5 6
7 8 9
0 #
C
<Interrupt>
button