Fuji Xerox APEOSPORT-II C7500 User Manual page 109

Auto
According to the set feature used, the machine automatically selects [Collated] or
[Uncollated].
Copies are collated when any of the following features is used: auto document feeder,
2 Sided Book Copy, Covers, [Blank Separators & Handouts] or [Transparency Set &
Handouts] of Transparency Separators, Booklet Creation, Stapling, Build Job, Sample
Set, and Combine Original Sets.
When you do not use any of the above-described features, copies are not collated.
Collated / Stapling / Punching
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts
sheets by page.
Stapling
Sets the position for stapling. C-Finisher/C-Finisher with Booklet Maker is capable of
stapling about 2 - 50 sheets of paper (when P paper or J paper is used). Booklet
Finisher D2 is capable of stapling 2 - 100 sheets of paper (when P paper or J paper is
used). Available paper types are: plain paper, recycled paper, side 2 paper,
heavyweight 1 (105 - 176 g/m
m 2 ), coated (105 - 176 g/m
m 2 ), and custom paper 1 to 5.
Booklet Finisher D2 cuts the staple nails depending on the number of sheets. The
stapled nails may be bent depending on the type of paper used.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
• In the following cases, the actual stapling position is different from the stapling position
appearing on the screen:
When [Original Orientation] is set to [Upright Images], and [Stapling] is set to one position at
the right side.
When [Original Orientation] is set to [Sideways Images], and [Stapling] is set to one position
at the left side.
Hole Punching
Sets the position for punching. C-Finisher/C-Finisher with Booklet Maker offers three
different punch positions to choose from: 2 Holes Left, 2 Holes Top, 2 Holes Right.
Booklet Finisher D2 offers six different punch positions to choose from: 2 Holes Left, 2
Holes Top, 2 Holes Right, 4 Holes Left, 4 Holes Top, 4 Holes Right.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note • If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.
Upright Images
Select this item when placing the top edge of the document against the top side of
the document glass or document feeder.
2 ), heavyweight 1 (Side 2), heavyweight 2 (177 - 280 g/
2 ), coated 1 (Side 2), punched paper, tab stock (105 - 176 g/
Output Format
3
107