Interrupting The Copy Job - Fuji Xerox ApeosPort-V C5580 User Manual

2
Select [Change Quantity].
3
Specify the number of copy sets with the numeric keypad.
The new quantity must include the number of copies that have already been printed. You
cannot enter a number less than the number of copies that have already been printed.
4
Press the <Start> button.
Note • If you enter the same value as the number of copies that have already been printed, the machine

Interrupting the Copy Job

You can temporarily stop the copy job to have the machine process another job.
Important • Press the <Interrupt> button only after all the documents have been scanned. The machine does not
• Even when the <Interrupt> button is pressed, the machine may not accept another copy job if 10
1
Press the <Interrupt> button.
The <Interrupt> button lights up to indicate
that the machine is in the Interrupt mode.
2
Load a document and set features if necessary.
3
Specify the number of copy sets with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
The <Interrupt> button goes out to indicate that the Interrupt mode is exited.
Note • If you used the document glass to copy the document, remove the document from the document
6
Press the <Start> button.
The suspended copy job is resumed.
will not execute a copy job even when you press the <Start> button.
accept another job while it is scanning the documents, or when [Next Original] has been selected.
sets or less are being copied using the document glass.
glass.
Operations during Copying
<Interrupt> button
99
3