Figure 4-20 Standard View Trunk Groups; Section 15 Trunk Groups - NEC UNIVERGE SV9100 Programming Manual

ISSUE 2.0
S 15 T
ECTION RUNK
This screen combines system data relevant to Trunk Groups. Trunk Groups prioritize
the use of a group of trunks. Priority of Trunk Groups can be done via the Route
Table. A Route Table entry can then be used by trunks and extensions.

Figure 4-20 Standard View Trunk Groups

2) Assign priorities to
the trunks in the
Trunk Group.
SV9100 PC Programming Manual
G
ROUPS
1) Add trunks to the
Trunk Group.
5 & 6) Specify the extensions that use
the selected Route Table.
3) Set up the Route
Table.
7) Specify the trunks that use
the selected Route Table.
4) Select the Route Table
and the Night Mode.
4-33