Table of Contents
Advertisement
Chapter 1 General Description
4.2
Rear View
7
6
1
AC Inlet
A socket for connecting a power cord.
2
PCI Slots
Slots for installing PCI cards.
3
Chassis Lock Tab
A tab for locking the side cover.
4
Serial Port (COM A) Connector
A connector for connecting serial interface devices.
This cannot directly connect to a network line. If the
optional N8117-01A Additional RS232C Connector Kit is
connected, the connector of N8117-01A is assigned as the
serial port B.
5
Display Connector
A connector for connecting a display
22
5
4
1
8
10 9
6
7
8
9
10
11
Express5800/T110i-S User's Guide
4. Names and Functions of Parts
2
3
USB Connectors
Connectors for connecting USB 3.0 interface devices.
LAN Connectors
Connectors for connecting to a network
(1000BASE-T/100BASE-TX /10BASE-T).
If Shared BMC LAN feature is enabled in ROM Utility,
LAN1 connector can also be used as the management
LAN connector. Sharing port is not recommended from the
point of performance and security.
Management LAN Connector
A LAN connector (100BASE-TX) for connecting
EXPRESSSCOPE Engine 3. This connector cannot be
used as a normal LAN port. This port cannot be used when
Shared BMC LAN feature is used.
LINK/ACT LED (green)
LEDs for showing the access status of LAN
SPEED LED (green/amber)
LEDs for showing the transfer speed of LAN ports
SPEED LED (green)
A LED for showing the transfer speed of the LAN port used
for management
Advertisement
Table of Contents
