Blade Types; Adding A Blade - NEC UNIVERGE SV9100 Programming Manual

ISSUE 2.0
3.1
3.2
SV9100 PC Programming Manual

Blade Types

In PCPro, blade types are categorized under the following four groups. When you
right click on the chassis model on the screen, the popup menu is displayed. The
menu lists the blades and each blade type is designated with a distinctive color.
Blade Type and Color
Telephone
Represented on the Blade Configuration screen as 'blue' blades. Telephone
blades provide interfaces to telephones being used in the chassis. Telephone
blades use telephone ports (e.g., a GCD-8DLCA makes use of eight telephone
ports).
Trunk
Represented on the Blade Configuration screen as 'yellow' blades. Trunk blades
provide interfaces to lines such as COI, DID, OPX, BRI, PRI, T1, CCIS, etc.,
which are being used in the chassis. Trunk blades, use trunk ports (e.g., a
GCD-4COTB blade makes use of four trunk ports).
Combo
Represented on the Blade Configuration screen as 'yellow/blue' blades. Trunk
blades provide interfaces to lines such as digital single line stations, which are
being used in the chassis. Combo blades, use telephone ports (e.g., a GCD-LTA
blade makes use of eight digital telephone ports and two analog ports).
Other
Represented on the Blade Configuration screen as 'green' blades. These
miscellaneous blades do not have a direct relationship to a trunk or telephone.
However, some blades under this category (e.g., GCD-VM00) use telephone
ports as they are associated with extensions.

Adding a Blade

To add a blade, complete the following steps:
1. With the mouse, right click on the slot where you want the blade to
reside.
2. A popup menu appears listing the blade types that can be installed.
There are two additional options on the popup menu. These are
Configure Card and Delete Card. These two options are only available
NOTE if a blade has previously been added.
4-5