NEC UNIVERGE SV9100 Programming Manual page 39

ISSUE 2.0
SV9100 PC Programming Manual
Table 3-1 Workspace Buttons (Continued)
Button
Grid View is available on screens that have a large number of
values that must be entered (e.g., screens with telephone
extensions). When Grid View is selected, the screen switches to a
table format, allowing you to easily enter a large number of values
for a specified extension.
For example, if assigning your incoming virtual ring tones for internal
extensions, you can switch from Form View to Grid View to list all of
the extensions in table format. Note that this option is not available
on all screens.
When you do not click the Apply button, but do one of the following, the system
applies the changes as if you had clicked the Apply button.
Attempt to leave the current screen.

Attempt to navigate a different item within the system data.

Use the Previous button.

Use the Next button.

Save the active configuration.

Exit the application. (Note that on some screens, the system prompts you to

save the changes or to exit without saving them.)
Generate a report.

Description
3-5