NEC UNIVERGE SV9100 Programming Manual page 65

ISSUE 2.0
2.
3.
4.
5.
6.
7.
8.
9.
SV9100 PC Programming Manual
This is a system-wide setting and is applied across ALL Service Groups.
Enable/disable Automatic Night Mode Service.
This selection enables/disables Night Mode Service for the system. This setting
is linked with 12-01-01.
This is a system-wide setting and is applied across ALL Service Groups.
Specify a Night Mode Service Group (1~32) to modify.
Define Schedule Patterns used by the selected Night Mode Service Group.
Schedule Patterns are comprised of time frames that are associated to Night
Modes.
You can define up to 10 Schedule Patterns for the selected Night Mode Service
Group. Schedule Patterns can be made up of 20 time frames. Each time frame
is associated with a Night Mode. These settings are linked with 12-03.
Refer to 10.1 Adding a Time Frame on page
Frame on page 4-25, 10.3 Moving a Time Frame on page 4-25
Modifying a Time Frame on page
Specify the Service Patterns applied to each day of the week.
Define the Schedule Pattern used each day of the week by the selected Night
Mode Service Group. These settings are linked with 12-03.
Assign a name to each Night Mode.
This can be used to identify the time frame. Night Mode names defined here
are referred to throughout the system. These settings are linked to 12-07.
Define public holidays and the Schedule Pattern used by the Night Mode
Service Group on these days.
These settings are linked with 12-04.
Select the trunks that are members of the Night Mode Service Group.
These settings are linked with 12-06.
Select the extensions that are members of the Night Mode Service Group.
These settings are linked with 12-05.
4-24, 10.2 Removing a Time
4-26.
and 10.4
4-23