Chapter 6 Pcpro Sd Card Copy; Overview; Standard Mode - NEC UNIVERGE SV9100 Programming Manual

PCPro SD Card Copy
S 1 O
ECTION VERVIEW
The SD card copy is used to migrate from an S (1GB) SD Drive to the larger E (4GB)
SD Drive-based system, and is also used if replacing the GCD-CP10 for any reason.
See below for details on using and what data is moved for each mode.
There are two modes to use:


1.1
SV9100 PC Programming Manual
Standard to migrate from an S (1GB) SD Drive to the larger E (4GB) SD Drive-
based system.
Advanced when replacing a GCD-CP10 with a SD Drive of the same size.

Standard Mode

Standard Mode copy is used when migrating from an S (1GB) SD Drive to an E
(4GB) SD Drive. Only the following items are migrated using this process and
none are optional:
1. System Database: The system database as programmed, the same
information as a database backup.
2. License Data: Any licenses that have been applied to the system but note
the built in 48 resource licenses are not moved.
3. InMail Messages: Stored voice mail messages.
4. InMail Greetings: Recorded user greetings.
1. To copy the old SD Drive data SD Card Copy from the Home tab under
Maintenance choose SD card copy.
UNIVERGE ® SV9100
Chapter 6
6-1