NEC UNIVERGE SV9100 Programming Manual page 121

ISSUE 2.0
SV9100 PC Programming Manual
To assign a group of telephones:
If you want to view previous assignments, press the Go button.
NOTE
1. Select the telephones from the Telephones list by clicking the check
boxes.
2. Select the function keys that you want to assign to the selected
telephones by clicking the Function Key checkboxes.
3. Click the Setup box to display the assignment type dialog box. Click the
Same button and click Specify if using CTI checkbox if appropriate.
Enter the starting CAP key number in the Start the assignment with
CAP field.
4. Click OK. The main CAP key assignment dialog is returned with the
assigned numbers displayed.
If required, edit the actual value for each function key that is displayed in the
Function key checkbox.
5. Click the Apply button to trigger the assignments.
Example
To setup extensions 101 ~105 to have function keys 1~8 set as CAP Keys
0010~0017 follow the steps below:
This example assumes CAP numbers 0010 and onwards are not used and
CAP number 0010 is the first free call appearance number.
NOTE
1. Select extensions 101~105 from the telephone list.
2. Click function keys 1~8 (i.e., click all items in the first row of function
keys).
3. Click the Setup box to display the assignment type dialog box. Click
the Same button, click Specify if using CTI checkbox if appropriate,
enter the starting CAP key number in the Start the assignment with
CAP field.
4. You will see function keys 1~8 given the values 0010 ~ 0017.
5. Click the Apply button to trigger the assignments.
The result is...
Ext 101
Key 1 = CAP 0010
Key 2 = CAP 0011
...
Key 8 = CAP 0017
Ext 102
Key 1 = CAP 0010
Key 2 = CAP 0011
...
...
Key 8 = CAP 0017
Ext 105
Key 1 = CAP 0010
Key 2 = CAP 0011
...
Key 8 = CAP 0017
A-5