Figure A-10 Assigning Cap Keys - NEC UNIVERGE SV9100 Programming Manual

ISSUE 2.0
Once the extension has been selected, click on the Edit Keys tab and assign the
Function Keys. To assign a key choose the feature to assign to a key, then click on
the key to be assigned. In cases where additional options must first be selected, a
menu will be displayed showing the option. The example below shows the options
when assigning CAP keys.
Here you see that CAP was selected from the function key options, in the Choice box
CAP Key 3 was selected, then line key three was clicked on. At that point line key
three is selected and the Choice box automatically advances to CAP Key 4. You can
continue to click on subsequent function keys until the desired CAP keys have been
assigned.

Figure A-10 Assigning CAP Keys

SV9100 PC Programming Manual A-13