NEC UNIVERGE SV9100 Programming Manual page 123

ISSUE 2.0
SV9100 PC Programming Manual
To assign a group of telephones:
If you want to view previous assignments, press the Go button.
NOTE
1. Select the telephones from the Telephones list by clicking the check
boxes.
2. Select the function keys that you want to assign to the selected
telephones by clicking the checkbox.
3. Click the Setup box to display the assignment type dialog box. Click the
Unique button and click Specify if using CTI checkbox if appropriate.
Enter the starting CAP key number in the Start the assignment with
CAP field.
4. Click OK. The main CAP key assignment dialog is returned with the
assigned numbers displayed.
If required, edit the actual value for each function key that is displayed in the
Function key checkbox.
5. Click the Apply button to trigger the assignments.
Example
To setup extensions 101~105 to have unique CAP keys across function keys 1~8
follow the steps below:
This example assumes CAP numbers 0010 and onwards are not used and
CAP number 0010 is the first free call appearance number.
NOTE
1. Select extensions 101~105 from the telephone list.
2. Click function keys 1~8 (i.e. click all items in the first row of function
keys).
3. Click the Setup box to display the assignment type dialog box. Click the
Same button, click Specify if using CTI checkbox if appropriate, enter
the starting CAP key number in the Start the assignment with CAP
field.
4. Enter 0010 in the Start with CAP number edit box. Or alternatively
click the "..." button and select CAP 0010 from the selection box.
5. Click the Apply button to trigger the assignments.
The result is...
Ext 101
Key 1 = CAP 0010
Key 2 = CAP 0011
...
Key 8 = CAP 0017
Ext 102
Key 1 = CAP 0018
Key 2 = CAP 0019
...
...
Key 8 = CAP 0025
Ext 105
Key 1 = CAP 0026
Key 2 = CAP 0027
...
Key 8 = CAP 0033
A-7