NEC UNIVERGE SV9100 Programming Manual page 74

To setup a Trunk Access Map complete the following:
1.
2.
3.
4.
4-32
Specify a trunk Access Map (1~400) to modify.
Select a Night Mode.
Specify the access type for each trunk using the Trunk Access Map.
To modify the access type, right click the trunk then select an access type from
the popup menu. These settings are linked with 14-07.
The various access types are listed below:
No access
Outgoing access only
Incoming access only
Access only when trunk on hold
Outgoing access when trunk on hold
Incoming access when trunk on hold
Incoming/outgoing access
Incoming/outgoing access when trunk on hold
Select the extensions that use the Trunk Access Map during the selected Night
Mode.
These settings are linked with 15-06.
Access Type
ISSUE 2.0
Image
Standard View