ISSUE 2.0
1.2
SV9100 PC Programming Manual
Advanced Mode
Advanced Mode copy is used if a SD Drive is being replaced with a new SD drive
of the same size, either an S (1GB) or E (4GB). The items below are selectable
options when using Advanced Mode copy.
System Database – The system database as programmed, the same
information as a database backup.
License Data – Any licenses that have been applied to the system.
InMail Messages – Stored voice mail messages.
InMail Greetings – Recorded user greetings.
Main System software – The system software on the SD Card to be copied, for
example v1.70.00. If this option is not selected, the software installed on the
destination GCD-CP10 will be used.
1.
To copy the old SD Drive data SD Card Copy from the Home tab under
Maintenance, choose SD card copy.
2.
Choose Advanced Mode.
3.
Click on Read SD Card.
6-7