10.4 Modifying A Time Frame; 10.5 Time Frame Duration; 10.6 Time Frame Night Mode - NEC UNIVERGE SV9100 Programming Manual

10.4 Modifying a Time Frame

10.5 Time Frame Duration

10.6 Time Frame Night Mode

4-26
To modify a time frame in a Schedule Pattern:
1. Select the time frame to modify.
2. Place the cursor at the top/bottom of the time frame until it changes
appearance.
3. Left click then drag from the starting/ending time to the desired change.
Surrounding time frames can limit changes because time frames
cannot overlap. To solve this problem either remove existing time
frames or modify them.
CAUTION
To find out the duration of a time frame select it and then hold down the left mouse
button. A popup appears indicating the duration and Night Mode.
To find out the Night Mode of a time frame select it and then hold down the left
mouse button. A popup appears indicating the duration and Night Mode.
ISSUE 2.0
Standard View