Table of Contents
Advertisement
MH-5000 User Manual
Step 7.
Customize the Firewall rule
Check the Activate this rule. Enter the Rule Name
as AllowVPN, Source IP as 192.168.88.0, and
Dest. IP as 192.168.40.0. Click Apply to store this
rule.
Step 8.
View the result
Here we have a new rule before the default
firewall rule. This rule will allow packets from
192.168.88.0 / 255.255.255.0 pass through
MH-5000. And accomplish the VPN tunnel
establishment.
At WALL-2:
Second, we will use the Manual-Key way to install the IPSec properties of WALL-1.
Step 1.
Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > VPN Settings > IPSec
84
Virtual Private Network – IPSec
Chapter 10
Advertisement
Table of Contents
