Table of Contents
Advertisement
MH-5000 User Manual
FIELD
Transport Layer
Condition
Protocol
Enable Replay
Action
Detection
Step 5.
Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
Step 6.
Add a Firewall rule
Same as that in IKE method. Please make sure
that
the
Firewall
is
WAN1-to-LAN1 to display the rules of this
direction. The default action of this direction is
Block with Logs. We have to allow the VPN traffic
from the WAN1 side to enter our LAN1 side. So
we click the Insert button to add a Firewall rule
before the default rule.
DESCRIPTION
Utilize this field to select some packets which
are specified protocol (ANY, TCP, UDP). If
the packets are not the specified protocol will
not be allowed to pass through IPSec tunnels.
Whether is the "Replay Detection" enabled？
Table 10-7 Setup Advanced feature in the IPSec Manual Key rule
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
ADVANCED SETTINGS > Firewall > Edit Rules
enabled.
Select
83
Virtual Private Network – IPSec
Range / Format
ANY / TCP / UDP
NO / YES
Chapter 10
EXAMPLE
ANY
NO
Advertisement
Table of Contents
