Table of Contents
Advertisement
MH-5000 User Manual
5.3 Steps
5.3.1 Telnet
Step 1.
Setup Telnet
Enter 23 instead of the default 2323 in the Server
Port field. Check the WAN1 checkbox. Click the
Selected of Secure Client IP Address, and then
enter the specified IP address (140.2.5.1) for
accessing MH-5000. And click the Apply.
5.3.2 WWW
Step 1.
Setup WWW
Check the LAN1 checkbox, and enter the new
Server Port 8080 that will be accessed by the
user's
browser
(http://192.168.40.254:8080).
Here we click All for all no IP range limitation of
clients. And click the Apply button.
5.3.3 SNMP
Step 1.
Setup SNMP
Check the LAN1 checkbox. In the Secure Client
Address field. If you prefer indicated specified IP
address. Just click the Selected, and enter the
valid IP address for reading the SNMP MIBs at
the MH-5000. Finally click the Apply button.
5.3.4 ICMP
Step 1.
Setup ICMP
Uncheck the WAN1 checkbox and make others
checked. Then click the Apply button.
SYSTEM TOOLS > Remote Mgt. > TELNET
SYSTEM TOOLS > Remote Mgt. > WWW
SYSTEM TOOLS > Remote Mgt. > SNMP
SYSTEM TOOLS > Remote Mgt. > MISC
39
Chapter 5
Remote Management
Advertisement
Table of Contents
