Table of Contents
Advertisement
MH-5000 User Manual
Step 2.
Add an IKE rule
Click the IKE hyperlink and click Add to add a
new IPSec VPN tunnel endpoint.
Step 3.
Customize the rule
Check the Active checkbox. Enter a name for this
rule like IKErule. Enter the Local IP Address
(192.168.88.0/255.255.255.0) and the Remote IP
Address (192.168.40.0/255.255.255.0). Select
the Outgoing interface of this Multi-Homing
Security Gateway. Enter the public IP of the
opposite-side VPN gateway (61.2.1.1) in the
Peer's IP Address. Click the ESP Algorithm and
select Encrypt and Authenticate (DES, MD5).
Enter the Pre-Shared Key as 1234567890. Click
the Apply button to store the settings. Note, in the
Action region, you should choose either ESP
Algorithm or AH Algorithm, or system will show
error message.
ADVANCED SETTINGS > VPN Settings > IPSec > IKE
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
Self local IP
Address
The opposite
side IP
Address
78
Virtual Private Network – IPSec
Chapter 10
Advertisement
Table of Contents
