Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Customize the rule
Same as those in IKE. But there is no pre-shared
key in the manual-key mode. Enter the Key for
encryption, such as 1122334455667788. Enter
the
Key
for
authentication,
11112222333344445555666677778888.
Additionally, the Outgoing SPI and Incoming SPI
have to be manually specified. Enter 2222 and
1111 respectively to the Outgoing SPI and the
Incoming SPI. Click Apply to store the rule.
FIELD
Active
Status
Manual
Rule Name
Local
Address
Type
IP Address
PrefixLen
Subnet Mask
Condition
Remote Address
Type
IP Address
PrefixLen
Subnet Mask
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
such
as
DESCRIPTION
This field will activate this IPSec policy rule
Key
The name of this IPSec policy
Determine the method to connect to the
remote side of VPN by using the local subnet
or the local single host.
The local IP address
/
The local IP Netmask
Determine the method to connect to the local
side of VPN by using the remote subnet or
the remote single host.
The remote IP address
/
The remote IP Netmask
81
Virtual Private Network – IPSec
Range / Format
Enable / Disable
text string
Subnet Address /
Single Address
IPv4 format
IPv4 format
Subnet Address /
Single Address
IPv4 format
IPv4 format
Chapter 10
EXAMPLE
Enabled
ManualKeyrul
e
Subnet
Address
192.168.40.0
255.255.255.0
Subnet
Address
192.168.88.0
255.255.255.0
Advertisement
Table of Contents
