Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Add new classes
Create a sub-class named web-from-WAN from
the default class. Enter 0.3% in the bandwidth
field. Make sure that Borrow button is unchecked
and then web-from-WAN class will not enlarge
the bandwidth from borrowing other unused
bandwidth. Finally, click Apply button. See the
steps in the right diagram.
Subsequently, we will continue to setup another
two classes, such as video-from-WAN class and
web-from-DMZ class. Select the default class and
click the Create Sub-Class to create these two
classes. The setting procedure is the same as the
web-from-WAN class described.
FIELD
Activate this class
Class name
Bandwidth
Borrow
BUTTON
Back
Apply
Reset
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions > Create
Sub-class
DESCRIPTION
Enable the bandwidth management class for later using
Bandwidth management class name
How many percentage does this class occupy higher
class?
When the bandwidth of other class is idle, it will use the
bandwidth of other class to increase bandwidth
temporarily.
DESCRIPTION
back to previous configuration page.
Apply the settings which have been configured.
Clean the filled data and restore the original one.
Table 18-5 Add new class in the bandwidth management feature
127
Bandwidth Management
Range/Format
EXAMPLE
Enable/Disable
text string
web-from-WAN
0.1 ~ Max Value
(as red text
described)
Enable/Disable
Chapter 18
Enabled
0.3
Disabled
Advertisement
Table of Contents
