Table of Contents
Advertisement
MH-5000 User Manual
You may find many rules configuration in the MH-5000. They are distributed in the respective feature. These rules
include
1.
NAT rule
2.
Virtual Server rule
3.
Firewall rule
4.
Policy route rule
5.
Bandwidth management rule
The behavior of each rule is different, and so are their configuration parameters. But the designed principle of each rule is
the same. The configuration is divided into three parts as Figure 2-3 illustrated. You just need to enter the necessary
information onto each part according to your requirement. As for the definitions of the three-part configuration, please
refer to the following description.
1.
Status: Describe the status and name of this rule.
2.
Condition: What kind of characteristics does packet hold? And it will be captured by this rule.
3.
Action: If the packet is captured by this rule? What action will this rule do?
As the Figure 2-4 illustrated, the page of the rule edition is also divided into three parts. Their definitions are also the
same as we have discussed in Figure 2-3.
Additionally, please note that there is a button named "Move Before" in the Figure 2-4. If you are not satisfied with the
current rule sequence, you can adjust the rule sequence by using the "Move Before" button.
Status field:
Describe the status and
name of this rule
Figure 2-4 The rules in the page of the rule edition are also divided into three parts.
Condition field:
What kind of characteristics
does packet hold? And it will
be captured by this rule
20
System Overview
Action field:
If the packet is captured by this
rule? What action will this rule
do?
If you are not satisfied with the
current rule sequence the rule
sequence by using the Move
Before button.
Chapter 2
Advertisement
Table of Contents
