Planet mh-5000 User Manual page 20

MH-5000 User Manual
Step 4. Check NAT Status
The default setting of NAT is in Basic Mode.
After applying the Step 3, the NAT is
automatically configured related rules to let
all private-IP LAN/DMZ-to-WAN requests to
be translated with the public IP assigned by
the ISP.
Step 5. Check NAT Rules
The MH-5000 has added the NAT rules as
the right diagram. The rule Basic-DMZ1
(number 1) means that, when matching the
condition (requests of LAN/DMZ-to-WAN
direction with its source IP falling in the range
of 10.1.1.254 / 255.255.255.0), the request
will be translated into a public-source-IP
requests, and then be forwarded to the
destinations.
Step 6. Setup IP for the FTP
Server
Step 7. Setup Server Rules
Insert a virtual server rule by clicking the
Insert button.
ADVANCED SETTINGS > NAT > Status
ADVANCED SETTINGS > NAT > NAT Rules
Assign an IP of 10.1.1.5/255.255.255.0 to the FTP server under DMZ1. Assume the
FTP Server is at 10.1.1.5. And it is listening on the well-known port (21).
ADVANCED SETTINGS > NAT > Virtual Servers
13
Chapter 1
Quick Start