Table of Contents
Advertisement
MH-5000 User Manual
Step 5.
Check NAT Rules
The MH-5000 has added the NAT rules as the
right diagram. The rule Basic-LAN1 means that,
when matching the condition (requests of
LAN/DMZ-to-WAN direction with its source IP
falling
in
the
range
of 192.168.1.254
255.255.255.0), the request will be translated
into a public-source-IP requests, and then be
forwarded to the destinations.
1.6.2 WAN1-to-DMZ1 Connectivity
This section tells you how to provide an FTP service with a server installed under your DMZ1 to the public Internet users.
After following the steps, users at the WAN side can connect to the FTP server at the DMZ1 side.
Step 1.
Device IP Address
Setup the IP Address and IP Subnet Mask for
the MH-5000 of the DMZ1 interface.
Step 2.
Client IP Range
Enable the DHCP server if you want to use
MH-5000 to assign IP addresses to the
computers under DMZ1.
Step 3.
Apply the Changes
Click Apply to save your settings.
ADVANCED SETTINGS > NAT > NAT Rules
/
BASIC SETUP > DMZ Settings > DMZ1 Status
12
Chapter 1
Quick Start
Advertisement
Table of Contents
