MH-5000 User Manual
Step 14. Customize the Firewall rule
Check the Activate this rule. Enter the Rule Name
as AllowVPN, Source IP as 192.168.88.0, and
Dest. IP as 192.168.40.0. Click Apply to store this
rule.
Step 15. View the result
Here we have a new rule before the default
firewall rule. This rule will allow packets from
192.168.88.0 / 255.255.255.0 pass through
MH-5000. And accomplish the VPN tunnel
establishment.
At WALL-2:
Here we will install the IPSec properties of WALL-2. Note that the "Local Address" and "Remote address" field are opposite
to the WALL-1, and so are "My IP Address" and "Peer's IP Address" field.
Step 16. Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > VPN Settings > IPSec
92
Virtual Private Network –Dynamic IPSec
Chapter 11