Planet mh-5000 User Manual page 163

MH-5000 User Manual
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
Interface PORTS
Configuration
(WAN/LAN/DMZ)
Backup Configuration
Restore Configuration
Factory Reset
Firmware Upgrade
Setup TELNET Server
Setup SSH Server
Setup WWW Server
Setup HTTPS Server
Setup SNMP Server
MISC Setup
Enable/Disable SNMP
Configure SNMP server
File System Full
Update remote
management settings.
Set Gateway
Set DNS IP Address
Syslog Reload
Enable/Disable Ipmon
System Checksum Update
Disable Multicast
Update Multicast
SYSTEM: [S18] Backup configuration file by admin
(192.168.17.102:443).
SYSTEM: [S19] Restore configuration file by admin
(192.168.17.102:443).
SYSTEM: [S20] Factory Reset to default settings by admin
(192.168.17.102:443)
SYSTEM: [S21] Firmware upgraded by admin
(192.168.17.102:443)
SYSTEM: [S28] Enable SNMP by admin
(192.168.17.104:443)
SYSTEM: [S28] System Location: Building-A.
SYSTEM: [S28] Contact Info: +886-2-28826262.
SYSTEM: [S28] Disable SNMP.
SYSTEM: [S31] Update remote management TELNET
Server settings by admin (192.168.17.102:443).
SYSTEM: [S32] WAN1: Gateway IP: 192.167.17.254
SYSTEM: [S32] WAN1: Got PPPoE Gateway IP
210.58.28.91.
SYSTEM: [S33] WAN1: Clear DNS IP Address.
SYSTEM: [S33] WAN1: DNS IP Address: 168.95.1.1.
SYSTEM: [S33] WAN1: Get DNS Automatically.
SYSTEM: [S34] Syslogd stop.
SYSTEM: [S34] Syslogd start.
SYSTEM: [S34] Syslogd restart.
SYSTEM: [S35] Enable Ipmon.
SYSTEM: [S35] Disable Ipmon.
SYSTEM: [S37] Disable Multicast on interface WAN1
SYSTEM: [S37] Update Multicast on interface WAN1 to xxx
SYSTEM: [S37] Update Multicast on interface WAN1 to xxx
156
Appendix C
System Log Syntax