Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Setup Time/Date
Select the Time Zone where you are located.
Enter the nearest NTP time server in the NTP
time server address. Note that your DNS must be
set if the entered address requires domain name
lookup. You can also enter an IP address instead.
Check the Continuously (every 3 min) update
system clock and click Apply. The MH-5000 will
immediately update the system time and will
periodically update it. Check the Update system
clock using the time server at boot time and click
Apply if you want to update the clock at each
boot. If you want to manually change the system
time, uncheck the Continuously (every 3 min)
update system clock and proceed by entering the
target date.
FIELD
Time zone
NTP time server address
Continuously (every 3
min) update system
clock
Update system clock
using the time server at
boot time
Manual Time Setup
Step 4.
Setup Timeout
Select the target timeout (e.g. 10 min) from the
System Auto Timeout Lifetime. Click the Apply
button. Now the browser will not timeout for the
following 10 minutes after your last touching of it.
FIELD
System Auto Timeout
Lifetime
SYSTEM TOOLS > Admin Settings > Time/Date
the time zone of your area
Use NTP time server to auto update date/time value
System will update system date/time value every 3 minutes to NTP
time sever.
System will update system date/time value to the NTP time server
at boot time.
Manual setting Time & Date value.
Table 4-3 System Tools – Time Data menu
SYSTEM TOOLS > Admin Settings > Timeout
When system is idle for a specified time, system will force the
people who logins into the system will logout automatically.
Table 4-4 System Tools – Timeout menu
DESCRIPTION
DESCRIPTION
33
Chapter 4
System Tools
EXAMPLE
N/A
tock.usno.navy.mil
Enabled
disabled
N/A
EXAMPLE
10
Advertisement
Table of Contents
