Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Customize the rule
Check the Activate this rule checkbox. Enter the
rule name as PC1_1, and enter the IP address of
PC1_1 (192.168.40.1 / 255.255.255.255). Select
Block and Log to block and log the matched
traffic. Click the Apply to apply the changes.
Activate this rule
Status
Rule name
Source IP &
Netmask
Dest IP &
Netmask
Service
Condition
Configure dest.
Port?
Type
Dest. Port
Forward / Block
Action
the matched
session
do not log / Log
the matched
session
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
FIELD
Enable the firewall rule for later using
The name of the Firewall rule
Compared
whether Source IP/Netmask is matched or
not.
Compared
whether Dest IP/Netmask is matched or not.
Verified the service of incoming packet is
belong to each TCP、UDP、ICMP.
If the service is TCP or UDP, we can choose
to configure or not to configure destination
port.
If we decide to configure destination port, we
must choose the port to be single or range.
If we select single at above field, we just
have to fill a port in the first blank space. If
we select range at above field, we need to fill
the range of the ports.
If packet is matched the rule condition,
Forward or Block this matched packet?
If packet is matched the rule condition, Log
or Don't log this matched packet?
DESCRIPTION
with
the
incoming
with
the
incoming
61
Range / Format
Enabled /
Disabled
text string
packets,
IPv4 format /
IPv4 format
packets,
IPv4 format /
IPv4 format
TCP / UDP /
ICMP
Enabled /
Disabled
Single / Range
1 ~ 65534
Forward / Block
log / do not log
Chapter 8
Firewall
EXAMPLE
Enabled
PC1_1
192.168.40.1
255.255.255.2
55
0.0.0.0
0.0.0.0
Any
Disabled
N/A
N/A
Block
log
Advertisement
Table of Contents
