Planet mh-5000 User Manual page 55

MH-5000 User Manual
Service
Type
Dest Port
Passive FTP
client
Redirect to
internal server
under
Internal IP
Port
Action
Auto update to
Firewall rules
when you Apply
this page?
Auto update to
NAT rules when
you Apply this
page?
Step 9. View the Result
Now any request towards the MH-5000's WAN1
IP (61.2.1.1) with port 44444 will be translated
into a request towards 10.1.1.5 with port 21, and
then be forwarded to the 10.1.1.5. The FTP
server listening at port 21 in 10.1.1.5 will pick up
the request.
The service which is provided by the real
server.
Port is Single or Range
The TCP/UDP port number which is provided
by the real server.
If the Passive FTP client is checked, it will
connect to the internal DMZ FTP server of
MH-5000 when FTP client uses passive
mode. Otherwise, it will not work.
The subnet which is located the virtual server.
The IP address which is actually transferred
to the internal DMZ
The port number which is actually transferred
to the internal DMZ.
If you filled 0 in this field, it means that the
real connected port is the same as the
translated destination port.
If you checked this, it will add the Firewall
rules automatically when you add a virtual
server rule.
If you checked this, it will add the NAT rules
automatically when you add a virtual server
rule.
Table 6-3 Add a Virtual Server rule
ADVANCED SETTINGS > NAT > Virtual Servers
48
Chapter 6
TCP / UDP TCP
Single / Range Single
1 ~65534 44444
Enabled /
Enabled
Disabled
LAN / DMZ
DMZ1
regions
IPv4 format 10.1.1.5
0 ~ 65534
Enabled /
Enable
Disabled
Enabled /
Enable
Disabled
NAT
21