Planet mh-5000 User Manual page 93

MH-5000 User Manual
Step 4. Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
Step 5. Add a Firewall rule
Same as that in IKE method. Please make sure
that the Firewall is
WAN1-to-LAN1 to display the rules of this
direction. The default action of this direction is
Block with Logs. We have to allow the VPN traffic
from the WAN1 side to enter our LAN1 side. So
we click the Insert button to add a Firewall rule
before the default rule.
Step 6. Customize the Firewall rule
Check the Activate this rule. Enter the Rule Name
as AllowVPN, Source IP as 192.168.40.0, and
Dest. IP as 192.168.88.0. Click Apply to store this
rule.
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
ADVANCED SETTINGS > Firewall > Edit Rules
enabled. Select
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
86
Virtual Private Network – IPSec
Chapter 10