Installing The Switch; Installing The Aileron Servos - Seagull Models CAP 232 Assembly Manual

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side of fuselage.
Switch.
INSTALLING THE FUSELAGE SERVO.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
Elevator servo .
Throttle servo .
www.seagullmodels.com
Rudder servo .
Elevator servo .
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm .
Loctite secure.
1 PCS.
Elevator servo .
Rudder servo .
Throttle servo arm.

INSTALLING THE AILERON SERVOS.

Servos.
Installing the aileron servo in place using the
same techniques used to flap servo.
Small weight.
Electric wire.
Adjustable Servo
connector.
Servo arm.
Elevator servo .
Small weight.
Thread.
String.
Aileron
Servo.
11