Flight Preparation; Preflight Check - Seagull Models CAP 232 Assembly Manual

FLIGHT PREPARATION.

A) Check the operation and direction of
the elevator, rudder, ailerons and throttle.
B) Plug in your radio system per the
manufacturer's instructions and turn every-
thing on.
C) Check the elevator first. Pull back on
the elevator stick. The elevator halves should
move up. If it they do not, flip the servo re-
versing switch on your transmitter to change
the direction.
D) Check the rudder. Looking from be-
hind the airplane, move the rudder stick to the
right. The rudder should move to the right. If it
does not, flip the servo reversing switch on
your transmitter to change the direction.
www.seagullmodels.com
INITIAL FLYING
AEROBATIC FLYING
stick forward should open the carburetor bar-
rel. If it does not, flip the servo reversing switch
on your transmitter to change the direction.
aileron on the right wing half. Move the aileron
stick to the right. The right aileron should move
up and the other aileron should move down. If
it does not, flip the servo reversing switch on
your transmitter to change the direction.
and receiver batteries before your first day of
flying.
in the CAP 232 to ensure that everything is
tight and well bonded.
E) Check the throttle. Moving the throttle
F) From behind the airplane, look at the

PREFLIGHT CHECK.

1) Completely charge your transmitter
2) Check every bolt and every glue joint
19