Table of Contents
Advertisement
Put the vertical stabilizer into the in the top
of the horizontal fin. The bottom edge of the
stabilizer should also be firmly pushed against
the top of the horizontal stabilizer.
Horizontal
90º
Stabilizer.
Epoxy.
www.seagullmodels.com
Fill epoxy.
Vertical
Stabilizer.
C/A glue.
ELEVATOR - RUDDER PUSHROD HORN
INSTALLATION.
Rudder control horn.
Elevator control horn.
1) Elevator and rudder pushrods assembly
follow pictures below.
Hinge.
Masking tape.
15
Advertisement
Table of Contents
