Control Panel - Xerox apeosport 550 I Network Administration Manual

2 Product Overview

Control Panel

The following describes the names and functions of components on the control panel.
001 002 003 016 017
004 005 006 019 020
007 008 009 022 023
010 011 012 025 026
013 014 015 028 029
2 21
No. Component
1 Brightness dial
2 Touch screen
3 <Online> indicator
4 <Job in Memory> indicator
5 <Job Status> button
6 <Review> button
7 <Machine Status> button
8 <Log In/Out> button
9 <Power Saver> button
10 <Clear All> button
28
1 2
018
021
024
027
030
20
Adjusts the brightness of the touch screen. Used to adjust the
brightness of the touch screen when it is too dark or too bright.
Displays messages required for operation and buttons for various
features. You can directly touch the touch screen to instruct operations
in screens and set features.
Lights when the machine is sending or receiving data to or from a client.
Lights when data is stored in the machine's memory.
You can check stored documents in [Stored Documents List]. For information
on [Stored Documents List], refer to "Print Report/List" under "Chapter 13
Machine Status" in the User Guide.
Press this button to confirm or cancel currently executing or completed
jobs, or to confirm or print saved documents.
In this manual, this button is indicated as the <Job Status> button.
Press this button to open the [Review] screen. In this screen, you can
check a list of the status of copy, fax and scan features whose settings
have changed from the defaults. You can also check the destination
information for sending faxes and e-mail.
In this manual, this button is indicated as the <Review> button.
Press this button to confirm the machine status and meters, check the
state of consumables, and print reports.
In this manual, this button is indicated as the <Machine Status> button.
Press this button to display the user ID input screen for System
Administration mode or Login Setup/Auditron Administration.
In this manual, this button is indicated as the <Log In/Out> button.
If the machine is not operated for a while, the machine's power
consumption is lowered to enter the power saver mode. In the power
saver mode, this button lights up. To cancel the power saver mode,
press this button again.
In this manual, this button is indicated as the <Power Saver> button.
Returns the statuses of all displayed services to their default values.
The machine will be reset to this state after it is turned on.
In this manual, this button is indicated as the <Clear All> button.
3 4 5 6 7
1 2 3
4 5 6
7 8 9
0 #
C
19 18 17 16 15 14
Function
8 9
10
11
12
13