Xerox apeosport 550 I Network Administration Manual page 31

No. Component
11 <Interrupt> button/indicator Press this button to temporarily stop a continuous copy job or printing to
12 <Stop> button
13 <Start> button
14 Numeric keypad
15 <Speed Dial> button
16 <C (Clear)> button
17 <Dial Pause> button
18 <Custom> buttons
(<Copy>, <Custom 2>,
<Custom 3> buttons)
19 <All Services> button
20 One touch button panels
21 One touch buttons
give another job higher priority. During an interrupt, the interrupt
indicator lights up. Pressing the <Interrupt> button again cancels the
interrupt and the previous operation is resumed.
In this manual, this button is indicated as the <Interrupt> button.
Some jobs such as print jobs designated from client computers cannot be
executed during the interruption. For detail information, refer to "Notes and
Restrictions on the Use of Interruption Feature" under "Chapter 17 Appendix"
in the User Guide.
Press this button to stop the current copy job or communications.
In this manual, this button is indicated as the <Stop> button.
Press this button to start copying or scanning.
In this manual, this button is indicated as the <Start> button.
Press these buttons to enter the number of copies, passwords and other
numerical values.
In this manual, these buttons are indicated as the "numeric keypad".
Used to specify a destination phone number for fax or e-mail.
In this manual, this button is indicated as the <Speed Dial> button.
Press this button if you have entered the wrong numerical value with the
numeric keypad.
In this manual, this button is indicated as the <C> button.
Used to insert a pause into a destination number.
In this manual, this button is indicated as the <Dial Pause> button.
Used to call a custom feature.
You can assign a feature to the buttons selected from the features
displayed on the [All Services] screen and [Language].
In this manual, these buttons are indicated as the <Copy>, <Custom 2>
and <Custom 3> buttons.
For information on registering a feature with a button, refer to "Screen
Defaults" under "Chapter 11 Setups" in the User Guide.
Used to display the [All Services] screen.
In this manual, this button is indicated as the <All Services> button.
You can change the features that appear in the menu. For detail information,
refer to "Screen Defaults" in "Chapter 11 Setups" in the User Guide.
Panels for one touch buttons.
You can leaf through panels to display 001 to 030, 031 to 060, and 061
to 070. M01 to M20 are reserved for job memory. These buttons
correspond to jobs registered in 01 to 20.
Specify a recipient with one button. These buttons are available for fax
and iFax.
Registered preset recipient numbers 001 to 070 are supported.
Function
Control Panel
2
29