Power On / Off; Powering On; Powering Off - Xerox apeosport 550 I Network Administration Manual

Table of Contents

Advertisement

2 Product Overview

Power On / Off

Turn on the power before operating the machine. The machine is ready for operation
within 35 seconds after the power is turned on. Turn the machine off at the end of the
day or when it is not in use for a long period of time. Also, use the power saving feature
when not in use for a while to reduce the power consumption.
For information on the power saving feature, refer to "Power Saver Mode" in Chapter
2 of the User Guide.
Important •

Powering On

The procedure for turning on the power is as follows.
2
1
Press the power switch to the [ | ]
position to turn the power on.
Note
Note

Powering Off

The procedure for turning the power off is as follows.
Important • Turning off the power of the machine may cause loss of data being processed.
1
Before turning the power off, make sure that all copy or print jobs have completely
finished. Also, make sure that the <Online> indicator and the <Job in Memory>
indicator are not lit.
Important • Never turn the power off in the following instances:
24
Switching off the power of the machine may cause loss of data being processed.
When the power is turned off, all functions of the machine will stop
machine off if it is used all day for receiving faxes.
• The "Please wait..." message
indicates that the machine is
warming up. The machine
cannot be used during
warming up.
When the power does not
come on, check if the
<RESET> button is in a
reset state (button is
pressed in).
- While data is being received
- While jobs are being printed
- While jobs are being copied
- While a scan is being executed
- While jobs are being faxed
Do not turn the
.
<TEST> button
<RESET> button

Advertisement

Table of Contents
loading

Table of Contents