Installation Procedure; Installation Overview; Enabling The Port And Setting Tcp/Ip - Xerox apeosport 550 I Network Administration Manual

Installation Procedure

Installation Overview

This section describes the configuration procedure to use the iFax feature on the
machine.
The following is the procedure to use the iFax feature.

Enabling the port and Setting TCP/IP

Enable the ports which are used for the iFax feature, and set an IP address of the
machine.
Configuring the e-mail environment
Configure the items for the iFax feature on the machine.
Note
Enabling the Port and Setting TCP/IP
First enable the ports for the e-mail feature, then set the IP address. The procedure for
setting the machine is as follows.
Note
For information on how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.65).
1
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the user ID using the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
Note
3) Select [System Settings].
2
Enable the ports which are used for E-mail.
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [Receive E-mail] and then select [Change Settings].
5) Select [Port Status] and select [Change Settings].
6) Select [Enabled] then select [Save].
7) Select [Close] repeatedly until the [Port Settings] screen is displayed.
8) Enable the [Send E-Mail - Port] as above.
9) Select [Close] repeatedly until the [Network Settings] screen is displayed.
• Configuration can also be performed using CentreWare Internet Services.
• The configuration can also be performed using CentreWare Internet Services.
• The default user ID is "11111". When using the Authentication feature, a password is
required. The default password is "x-admin".
Installation Procedure
123
13