Preparations; Installation Procedure; Installation Overview; Configuration On The Machine - Xerox apeosport 550 I Network Administration Manual

5 Installation When Using TCP/IP (LPD/Port 9100)

Preparations

Prepare the following items to install the machine when using a TCP/IP (LPD/Port
9100) protocol.

Installation Procedure

Installation Overview

The machine can be connected to a computer using a TCP/IP (LPD/Port 9100)
protocol.
The following is the procedure to use a TCP/IP(LPD/Port 9100) protocol.

Configuration on the Machine

The following describes the configuration procedure to use a TCP/IP (LPD/Port 9100)
5
protocol on the machine. Enable a LPD Port/Port 9100 port, then assign an IP address.
Note
For information on how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.55).
1
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the user ID with the numeric keypad or a keyboard displayed by pressing
Note
3) Select [System Settings].
2
Enable either the LPD port or the Port 9100 port as appropriate. In this example, the
LPD port is enabled.
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [LPD], and select [Change Settings].
5) Select [Port Status], and [Change Settings].
6) Select [Enabled], then select [Save].
7) Select [Close] repeatedly until the [Network Settings] screen is displayed.
46
TCP/IP network environment
CentreWare Utilities CD-ROM (provided with the machine)
PostScript 3 Kit (optional: when using Macintosh)
Configuration on the machine
Configuring TCP/IP (LPD/Port 9100) on the machine.
Configuration on the computer
Installing a print driver.
• The configuration can also be performed using CentreWare Internet Services or
CentreWare Utilities.
[Keyboard], and select [Confirm].
• The default user ID is "11111". When using the Authentication feature, a password is
required. The default password is "x-admin".