Port 9100 - Xerox apeosport 550 I Network Administration Manual

10 Using CentreWare Internet Services

Port 9100

This section describes the settings for the Port 9100 port.
Note
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the browser, and press the <Enter> key.
Note
3
Click the [Properties] tab.
4
Click [+] on the left of [Protocol Settings] to display the items in the folder.
5
Click [Port 9100].
6
Set [Port Number].
Note
7
Select the [Enable] check box to enable [TBCP Filter].
Note
8
Set [Connection Time-Out].
10
9
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
2) Enter the System Administrator user ID and password into [User Name] and
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
82
• Enable the Port 9100 port when using HP-UX.
Example of the IP address entry
http://192.168.1.1/
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
• When specifying a port number, add ":" and a port number to the end of the Internet address.
• Do not enter a number for the port number that is already used for other port numbers.
• The TBCP Filter is set only when an optional PostScript 3 Kit is installed.
be displayed.
[Password], and click [OK].
• The default user ID is "11111" and the default password is "x-admin".