Xerox apeosport 550 I Network Administration Manual page 17

C Finisher, C Booklet Finisher
22
23
24
No. Component
12 Document glass
13 C Finisher (optional),
C Booklet Finisher
(optional)
14 Output tray
15 Finisher tray
16 Punch scrap container
17 Staple cartridge
18 Booklet tray
(C Booklet Finisher only)
19 Front cover
20 Booklet module
(C Booklet Finisher only)
21 Booklet staple cartridge
22 Document feeder glass
23 Toner cartridge
24 Drum cartridge
Originals are loaded.
Allows you to staple or punch printed or copied documents.
The C Booklet Finisher allows you to fold printed documents in half.
Note • In this manual, the C Finisher and C Booklet Finisher are abbreviated
as "finisher".
Receives documents.
Stapled documents or punched documents are delivered.
Collects scraps from the puncher.
Staples are stored.
Receives documents when folding is selected in Booklet Creation.
Opened to clear paper jams, or replace staples.
A module for folding documents in half and stapling the folded
documents.
Two staple cartridges for booklet creation (gutter) are installed.
Scans documents loaded on the document feeder.
Contains toner (image forming powder).
Contains a photo conductor for transfer toner.
Machine Components
12
13
14
15
16
17
18
19
20
21
Function
2
15