Snmp - Xerox apeosport 550 I Network Administration Manual

10 Using CentreWare Internet Services

SNMP

This section describes the settings for SNMP.
Note
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the browser, and press the <Enter> key.
Note
3
Click the [Properties] tab.
4
Click [+] on the left of [Protocol Settings] to display the items in the folder.
5
Click [SNMP].
6
When changing the community name, set [Community Name (Read Only)],
[Community Name (Read/Write)], and [Community Name (Trap Notification)].
Note
7
Set [System Administrator].
10
8
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
2) Enter the System Administrator user ID and password into [User Name] and
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
80
• When managing the machine using a software such as the CentreWare, enable the SNMP
port.
Example of the IP address entry
http://192.168.1.1/
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
• When specifying a port number, add ":" and a port number to the end of the Internet address.
• Do not change the settings under normal conditions.
be displayed.
[Password], and click [OK].
• The default user ID is "11111" and the default password is "x-admin".