Ethertalk - Xerox apeosport 550 I Network Administration Manual

EtherTalk

This section describes the settings for EtherTalk.
Note
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the web browser, and press the <Enter> key.
Example of the IP address entry
http://192.168.1.1/
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
Note
3
Click the [Properties] tab.
4
Click [+] on the left of [Protocol Settings] to display the items in the folder.
5
Click [EtherTalk].
6
Set [Printer Name].
7
Set [Zone Name].
8
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator user ID and password into [User Name] and
[Password], and then click [OK].
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
Network Setting Items (Port/Protocol) for CentreWare Internet Services
• EtherTalk can be set only when an optional PostScript 3 Kit is installed.
• When specifying a port number, add ":" and a port number to the end of the Internet address.
• The default user ID is "11111" and password is "x-admin".
10
73