Lan B Connector Leds; Optional Management Processor Lan Leds - HP Integrity rx2620 User's & Service Manual

Table 40 Gb LAN A Connector LEDs
LAN LED Location
Not used Top
1000mb Second from top
100mb Second from
bottom
Activity Bottom

LAN B Connector LEDs

The 1Gb LAN B interface provides two LEDs on the rear panel (the LED on the left
is not used).
Table 41 Gb LAN B Connector LEDs
Location
Speed (upper left)
Speed (upper left)
Link (upper right)
Link (upper right)

Optional Management Processor LAN LEDs

Four iLO MP LAN LEDs are also on the rear panel if the server has an iLO MP
installed. Table 42
Table 42 Optional Management Processor LAN LEDs
LAN LED Location
Self-test Top
10BT Second from top
100BT Second from bottom
Standby Bottom
Power
Color
None
Amber
Green
Green
Table 41 details the LED locations and states for the LAN B connector.
Color Description
Yellow The 1000 MHz with Ethernet protocol and twisted-pair wiring
is enabled, off: no link
Green The 100 MHz with Ethernet protocol and twisted-pair wiring is
enabled, off: no link
Green Link
Off: No link
details the LED locations and states for the LAN A connector.
Description
None
Flashing amber: the 1000 Mbps with Ethernet protocol
and twisted-pair wiring is enabled.
Off: no link.
Flashing green: the 100 Mbps with Ethernet protocol
and twisted-pair wiring is enabled.
Off: no link.
Flashing green: The Activity LED lights, and all other
LEDs are off for a 10 Mbps connection.
Off: no activity
Color State
Yellow Management processor running
self test or error
Off Management processor has
booted
Green 10BT link established
Flashing green 10BT activity
Off No link or 100BT link
Green 100BT link established
Flashing green 100BT activity
Off No link or 10BT link
Green Standby power on
Off Standby power off
100